View Single Post
  #2  
Old 11-03-2002, 09:09 AM
wagsaccordsir's Avatar
wagsaccordsir wagsaccordsir is offline
AF Enthusiast
 
Join Date: May 2002
Posts: 650
Thanks: 0
Thanked 0 Times in 0 Posts
Here's how I have done it.. I did the swap, the header and downpipe are for the prelude, and the rest of the exhaust is for the Accord seeing that it is an Accord body and the exhaust has to twist and turn through matching the underside of the car. This will have to be custom made where the two meet, should not cost more than a $100 bucks.

Any engine parts need to be for the prelude, except for your intake and those lil universal air breathers.

Other parts will fit, such as the Accord throttle body and fuel injectors and a few others, but you will not get the performance of the H22 using the Accord parts as they are limited to the F22's specs. The H22 has higher specs and you should use everything it will give. The power steering will be an issue, as that needs to be custom made as well. I still havent hooked mine up yet as I'm not to worried about it. It only costs about 50 bucks..

Don't worry I had these same questions, and eventually once you know your car and engine, you know exactly what you need.
__________________
MY ACCORD ON KENWOOD'S PHOTO GALLERY

MY ACCORD ON CARDOMAIN


"CHEAP THRILLS"
I DON'T CARE HOW MANY SKY DIVES YOU'VE GOT. UNTIL YOU'VE STEPPED OUT INTO COMPLETE DARKNESS AT 850' WEARING 95LBS. OF EQUIPMENT AND 68LBS. OF PARACHUTE. YOU JUST HAVEN'T LIVED.
ARMY AIRBORNE!!!
Reply With Quote