[Davescort97]

The turn signals and the brake lights work on 2 different wiring schemes. However, they do use the same bulb. I'd check the bulbs to see if they are all right. You said you checked current to the bulbs and it was all right. Did you check the current while the brake and turn signals were on? With that much body damage on the front the brakes must have been applied when hit. Maybe the filaments fell out. I know it is a long shot, but it's happened to me. One day might low beams headlights didn't work. The fuse was good, the relay was good and the wiring was good. Turned out that both low beams burned out at the same time. So try a couple new bulbs. If they are getting current like you checked it would have to be this or a bad ground.