Quote:
Originally posted by Blue94G20T
I called the vendor Isidro at High Performance Online 1-800-868-7174 today and he gave me a quote of $444 w/o shipping. This includes 4 GC coilover springs and 2 Front GC camber plates. The rates that were recommended to him by GC were 300f/200r. He says he sold 7 sets already to P10 customers and is currently all out, but Ground Control is providing more sets for him in the next couple of days. This deal is only till the end of the week according to him. Just passing the info.
|
He's quoting you information for a SE-R. His
cost for G20 GCs and the CC plates is higher than that. I know what dealer cost is on those products.
The G20 set-up costs $100 extra due to the front mounting plate that comes with it.
If he is selling you caster/camber plates for a G20 he is ripping you off since they won't do squat for a G20. Are you sure he is aware you are talking about a G20?
Ground Control recommends 340/250 for the G20. How do I know this? I organized a group deal for GCs and talked with the folks at GC directly. I also know that they recommend 300/200 for the SE-R.
That said, 300/225 might not be a bad combo. I originally ordered 340/275 and switched to 275/200. I think 300/225 might be a pretty good set-up. You cannot run it quite as low because of the lower spring rates, but it's much less giggly.
Don't go for any deal that includes the CC plates for a G20. They won't do a thing.