|
Re: 2000 Blazer Exhaust
The original pipe is 2.5in right after the cat-back flange for about 2in then reduces down to 2.25in before the muffler, 2.25in from there out. You will need a muffler with an Offset in/Center out layout if you are keeping a single exit exhaust, a universal muffler hanger, and about 18in or so of pipe depending on where you place the muffler.
__________________
2000 Chevy Blazer ZR2
Performance Mods: Numerous
Suspension Mods: Some, but not enough
Exterior Mods: Just Right
1987 Buick Turbo T Dark Red
Low 11 sec sleeper 
.030 4.1 block, PT6262E, & other odds and ends....
My Cardomain
|