|
Re: lower intake
heres an update on how job going so far. well on easter day i went to sears and bought a torque wrench 25in/lb - 250in/lb .i now feel confident that i can do this, so put gasket on and set torque wrench to first step in tightening sequence,tightend bolts first step was ok while doing second one every bolt went ok (i thought wrong ) it appears the wrench is defective as 3 bolt heads were snapped off.now im stuck as to how to remove them. i called sears and the manager at store said he relayed problem to corp. and that i should hear from them in a few days. any sugestions as to how i can get them out,or wait till sears calls back.i know i need a new set of bolts but do i also need new gaskets. k
|