[dizzle1]

Originally Posted by LittleHoov

If you havent already, clean the throttle body. I personally pulled mine completely off so I could get to both sides of the throttle plate really well. At the same time I did mine I also lubed up the throttle spring a bit....for me I noticed that my gas pedal stopped sticking, which Ive heard others complain about, and mine has started doing again. Makes it difficult to give light throttle.

I've done that also there was a layer of gunk on the back of it so I used a screwdriver that takes bits star bits I believe. Removing it makes cleaning allot easier. But when you put it back makes sure the perimeter is clean and all aligned well if not throttle will stick.

Check your MAF clean it if its dirty use some QTIPS and some electric cleaner or maybe rubbing alcohol but be careful its fragile don’t apply pressure.