Does anyone have a little difficulty putting their '87 cherokee in 4wd? I go to hit the 4wd and as I try to move the lever from normal 2wd through 4 high to N and to 4 Low there is a great deal of resistance from the get go. Sometimes it goes through as smooth as budda' on toast. Other times its like I'm gonna bend some linkage if I were to fourse it. I don't go that far of course, I simply try to drive a frw feet in 2wd and then stop and try it again. I have read the manual jthat states to roll at 3-5mph to go from 2 to 4 high then stop and put the trans in N and then move the transfer case lever through N to 4high. Whats the hold up, I have recently bought the jeep and I changed all the fluids including the transfer case. So I know it has fresh topped off fluids. Any advice or experience would be a nice hepl. Thanks Fellow Jeepers.