Quote:
Originally posted by turbos86
By under diff, we mean under the rear differential. Fujimi had the differential molded to the under tray, so that's why thug said you wouldn't want to take out the diff.
Good job so far! The metal color looks good.
Mind sharing with us how you got the brakes in there? Home made brakes?
|
Oh......... Well for the brakes, they came off a Fujimi ITR, I had them for spares after I modified the ITR's brakes. I'll try to explain how I did this, it's fairly easy.
Front: It basically consist of 4 pieces of stylene(on each side), 3 of them were bent and cut out to look like the letter "L" then I cut out a round(somewhat) shape to connect to the "L's" to where you glue the brake on. Here's a pic,
Like I said, 4 pieces. Here's what it is, piece "1" is the rounder piece where the brake makes it's contact to the assembly, pieces "2,3 and 4" are the "L's" which can vary in length depending on how far out you want the brakes to stick out. Make sense?
Rear: It's basically the same as the front except, you glue the "L's" to only piece #A32 but you could do it on the other side if you want the brakes more "out."
In the pic, I listed numbers, "1" is the rounder piece, and "2,3 and 4" are the "L's" you could add another "L" in desired to the top of the assembly, but don't really have too. If you have any more questions or don't understand this thing, just ask
Hopes this helps you on your project!!