Is it posible that I got 2nd gen.B16 with cable trans?
I read on
http://tech.hybridgarage.com/ that some of the differences between 1st and 2nd gen b16's(besides transmissions and OBD's) are:
1st gen has Milky white connectors 2nd gen. hasGrey connectors
Twin single wire O2 sensors One 4-wire O2 sensor
The motor that I got has grey connectors, it has 4 wires for O2 sensor but it came with YS1 cable trans.
On the tech.hybridgarage.com they also said that 2nd gen. hasMAP sensor as an integral part of the throttle body, not an external one with a tube. But my motor has throtelbody without MAP sensor,it has a tube.
I'm waiting for PR3,OBD0 ecu which I recently ordered. If the motor is 2nd gen(I just don't know how it got cable trans.) can I use that commputer? Oh.. One more thing: my motor has a broken sensor which is located on the firewall-side of the motor, all the way by the head. As I understand it is a knok sensor, but it has two wires!!!
At this point I'm completely confused
:huh: Thanks to everybody for replys