[kevinb70]

ok sorry, got bolts mixed up.

remove the two bolts from the a/c compressor as they go thru the bracket. the third bolt is a few inches directly below the water pump inlet hose! Altho in the b/w drawing, the bolt appears to be just above the left a/c bolt, just FURTHER in. I think i found it by feel.

the three bolt heads are all the same size...


and dont forget there is a top bolt, you get to after you take the horizontal bracket arm off the top of the mount. right next to left most head bolt which has that round protrusion which the bracket sits on.


3 bolts down below... 4th bolt on top.