[G20t Associate]

1. Open the hood and stand on the right side of the hood.
You will see a black box that has a whole bunch of fuses. One of them says "fog light".

2. If you can get a screwdriver and push it against the clip and press the the fuse next to the fog light.

3. look for a red wire with a thin BLUE stripe. This is the one you are going to cut. be careful not to cut the red wire with the green stripe as they do look the same without enough light.

4.take the cut wire going to the fog light relay and connect it with the wire your going to connect to the park lights. Put all the wires and relays back to its original position.

5. cut the park light and connect the wire from the fog light relay to the park light. make sure that the park light is connected back to its power source along with the fog light wire.

6. Turn on the park lights and press the fog light button and you will see the fog lights on with the park lights.

You can look at the photo on the right to see what it looks like when its done