Alright been a little while, few updates...
Code P0304, CLeared
Changed the fuel injector clip on the #4 injector, no difference.
Started running rougher.
Code P0304, cleared
Coolant Leak on Right side hose under Throttle Body, Cut a piece of the hose because it was bulging and causing the coolant to pass the nipple area.
Still Rough, shaky like one cylinder isn't working correct, not always but about 4-6 times a minute
Code P0304, cleared
Compression Test 1 & 5 @ 125 psi, 2,3,4 & 6 @ 100-105 psi (not the actual test with the throttle all the way open, just a quick start and shut off)
#6 plug was gassy so I switched the plug & coil pack with cylinder #1 to try and isolate that problem.
Cleared all codes caused by not having plugs/coils in
Testing tomorrow, Any ideas? Thinking about swapping the #6 injector and doing all the seals on the injectors. Getting a new connector for the #4 coil pack? Who knows... Getting sick of having the same code, wish a different one would come up already