Quote:
Originally Posted by 534BC
My door works fine with the inside switch, the inside handle, the outside handle, and the top switch. The lock-out also works fine.
It is only the remote that doesn't work (but it works too because anytime it is pressed the lights flash) It seems there may be a connection from reciever to door that is not right. I'm having trouble finding a wire diagram for it.
|
This Haynes manual shows everything BUT the connections to the sliding door.
You might have a talk with someone at an auto electrical shop just to get an idea which way to go.
I'm just guessing, but like you say, the fault may be in the wiring OR perhaps a fault with the sliding door actuator or a connection to it.
The only wiring in this book that shows anything related to the remote is an orange wire from the 10A radio fuse in the underhood accessory wiring junction box.
It goes to a remote control door lock receiver. You did say you've tried the radio fuse thing too didn't you?
I have a problem with this because the remote is working to everything else.