View Single Post
Old 01-13-2010, 11:12 AM   #3
Blue)(Fusion
AF Enthusiast
 
Blue)(Fusion's Avatar
 
Join Date: Jan 2008
Location: North Royalton, Ohio
Posts: 703
Thanks: 0
Thanked 13 Times in 13 Posts
Send a message via AIM to Blue)(Fusion Send a message via Yahoo to Blue)(Fusion
Re: 2007 mustang problems

Quote:
Originally Posted by a1c little View Post
secound why does my car make sqeaking noises under my hood, it stops if i sprey wd40 under there.
Where do you spray the WD-40? By the way WD-40 can be corrosive to some materials so I would shy away from it. Where does the squeaking come from? With the engine cold, remove the serpentine belt and start the car for a few moments. If there is no squeaking you know it is a belt-driven accessory. Do not run for more than 2-3 minutes without the belt or you run the risk of over heating.

With the belt off and engine off, spin the pulleys on the accessories and the idler and tensioner pulleys. See if you can find which one is squeaking.
__________________

2000 Mercury Grand Marquis LS
- 119k / 14.89s @ 92.11MPH [ pictures | videos ]
> Dual Flowmaster Delta 40s / J-Mod / PI Intake Manifold & Cams / Marauder Air Box & 80mm MAF / 3.55 Trac-Lok
> Bumper Tuck / Steeda UD Pulleys / CVPI Zip Tube / Ported & Polished Plenum / BBK 70mm TB
> BOC 93 Octane Tune / Headlight Relay Upgrade / 17mm rear stabilizer bar / Heinous Aluminum Billet Rear Control Arms
> CVPI aluminum driveshaft

Blue)(Fusion is offline   Reply With Quote