Here's a couple of shots of my latest project, Reji's kit of the Skoda Octavia WRV Evo 2. The kit is a pretty basic resin kit and needs a lot of tidying up even to get to this stage, here the wheels and brakes are done, the chassis is ready for top coat and the body has had several coats of filler primer and normal primer and quite a lot of filing to get to this stage. Still not sure about the ride height either, the holes for the front axle were too high pushing the wheels right into the arches so these were extended downwards but I can't decide whether the rear is too high, the car sits about level now but the ground clearance at the rear looks a little too much to me.
More as I progress.
Steve
