Thanks for the reply Shorod!
The system is working now. What I had done wrong was to connect the hood pin switch to the plastic cover in the engine bay, ergo, no ground. It was transferred to metal and it worked. Also, I saved the model I gave the link for the schematics for, for my jeep and got an older model CT-3300 2 in 1 to install on the ford. the negative park light is in the 12-pin harness on the model i installed. sorry for the confusion. the keyless entry option was installed and it works fine, except that i suspect there is a problem with the door actuator of the driver side.
unlock switch on the driver's side doesn't work, but the lock switch locks everything except the driver door itself. on the passenger side, unlock and lock works with everything except the driver's door. does this seem to be an actuator problem on the driver's side? remote works with all doors except of course the driver's side.