Quote:
Originally Posted by deesandvees
Well this has been a lively thread  I feel like Tom Hanks in "Castaway" 
I found out I need to order a little $20 cruise control bracket from Edelbrock. Problem solved, hopefully. Now it's on to the problem of my TV cable being the improper length due to the fact that an Edelbrock carb's throttle throw is a 1/4" shorter than the factory Q-jet's throw. |
Sorry, I somehow missed this thread. In the linkage on your first picture above, that hole next to the accelerator cable connector is where a 1" stud goes - cruise control connects to this stud.
As for the TV cable problem, Bowtie Overdrives makes a kit for exactly that issue -
www.tvmadeez.com for information as well.
__________________
1988 9C1 - Modified LM1 @ 275HP/350TQ - TH700R4 - 3.08 8.5" Disc Rear - see it at
http://www.silicon212.org/9c1!
2005 Crown Vic P71 - former AZ DPS - 4.6 liters of pure creamy slothness!
1967 El Camino L79/M20 old school asphalt raper
Remember - a government that is strong enough to give you everything you need, is also strong enough to take everything you have.