We all know that Forenza cars have airbag light issues. Most of them are because of the TSB saying the wires under the seat are disconnected. Usually it is the passenger seat weight sensor. You will know when that is broke when your pass on/off light is not working right. Mine is working fine. I have checked the wires from the seats to the control module and they are good. I have the checked the clock spring and it is good. I was thinking the wires to the seat bags were pulled so I went and got some resistors 1.5 and 2.2 ohm to simulate the squibs in the bags so the computer thinks there are bags. From my research 1-3 ohms resistors simulate the bags. Neither one worked, I still have a airbag light on. I have bought a good used control module and no luck there either. The system resets it self every time the key is turned on. The control module detects a fault every time. From my research only the suzuki dealer has the scanner to pull the fault code. Anybody have any other ideas??? I dont want to take it to the dealer. The pass and driver bags are duel stage. Can I put resistors in in both pairs of wires going to the bag to simulate the bag to see if the bag itself is the problem? Forenzas have pretentioners and side impact sensors but I have not read one article of those going bad. Everything I read is saying its seat issues but I think mine are fine. Has anyone fixed a Forenza airbag light?