|
Re: Traction Control Switch
To get to it, pull up the console lid and remove the two bolts around the cup holder. Then use the cup holder as a sort of crude handle and pull up, that whole piece should pop loose.
The TC wiring basically just slides into the switch if I remember, youll need to pull it out if you plan on full removing that piece from around the shift lever. You can get it out of there in Park, but itll be easier if you move it down into something else. Just turn the key to the ACC position and put your foot on the brake, then you should be able move the shift lever....If youre doing this on a really steep incline or something, you might want to start the car.
Looks like there are currently a couple factory switches on Ebay for about 25 dollars...although a local junkyard would probably be much cheaper if you figure out the problem to be a bad switch.
__________________
2000 Oldsmobile Intrigue 3.5 DOHC V6
Mods: Fenderwell Intake, High-Flow cat, U-bend delete, 12-inch front rotors, GMPP handling kit, 20% tint, Pioneer front and rear speakers, Eclipse HU, cleared corners
1986 Jeep Cherokee 2.8 V6
|