Hi, The wiring on a 2008 Cobalt seems to be different than on earlier models. All the sites I go to, as well as the "12 Volt Resource" vehicle color code CD I purchased, say there is a blue wire on the brake light switch to connect to, when installing a remote starter. Mine has a different style switch than the one I've seen on a picture of a 2007. It had a blue wire. The wires on my 2008 are white, yellow and brown and none of the wires show 12 volt when the pedal is pressed, even with the ignition turned on. It seems to be a pedal position sensor rather than a plunger switch.The pin locations for the wires on the BCM seem to be in different locations also. Does anyone know where to get reliable information?
Lenny