[waxandgo]

rear brakes would not bleed. after replacing the both wheel break cylinders, disassembling the rear break lines and them being free from obstruction replaced the master cylinder. after not getting fluid to the rear moved on to the proportioning valve. disconnected the rear line and depressed the break, nothing coming out of the line, tested the electrical going into valve, there was current present and somehow while the break line was off my son pushed on the pedal and out comes the inside valve on to the ground but i got fluid coming out. now my problem is when re-installing the valve into the housing i cant get fluid to the rear breaks but it does come out of the valve opening? any suggestions