it took me 1hr to take 1,3,5 plugs out, after i finally figured out the resonator and intake manifold bolt to the intake manifold plenum.
heres what i did:
for #1 plug
A. loosen (1)bottom alternator bolt, remove (1)top alternator bolt, then
removed the bracket that holds the alternator, swing the alternator back
then take the plug out.
*Note: i didnt have to take the serpentine belt like the manual says.
for #3& 5 (i was confused about the RESONATOR ) A>K>A BRACKET that holds the
intake manifold.
A. Removed the bracket bolt from the side of the cylinder head and loosen
the top bolt from the intake then swinged away the bracket out and
replaced the plugs.
*Note: its easier and faster if you take the air cleaner assy and the bracket that
holds the Gas cable which what i did.
hope this helps ...