View Single Post
Old 09-30-2009, 07:50 PM   #3
MontanaDude
AF Newbie
Thread starter
 
Join Date: Sep 2009
Location: Halifax
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Can Not Remove Key - Key Release Solenoid

Okay so in conclusion, this place kicks ass. I cut the YELLOW wire and put a 4700 and 2700 ohm resistor (in parallel are about 1500 ohms) between the YELLOW and BLACK wire on the BCM side. Then tried to start the car, after which the security light started blinking, i knew i was close. It turned off after about 10 minutes, turned the key and a way a went. BRILLIANT this place is great.

Here is the other thread i am referring to for future reference of anyone reading this. Thanks again, hope this will help someone in the future.

http://www.automotiveforums.com/vbul...43#post6043743

Last edited by MontanaDude; 09-30-2009 at 11:54 PM.
MontanaDude is offline   Reply With Quote