Quote:
Originally Posted by izigara
 replaced ground terminal where grounded to frame so ground is good.tried running wire from from empty slot on fuse panel to the gray wire running to fuel pump, now pump activates when key is turned on or motor is running... but when motor is stoped for a few mins it fails to restart ,so there must still be a bug somewhere |
did you check the actual voltage of the power wire going to the relay with multimeter? i had a similar problem where i was only getting 1.86 volts to the under hood fuse box from the pink wire feeding the ecm fuses.
i just ran a new wire from the ignition switch because i couldn't get to where the high resistance area was without taking the entire dash out.