[tigereclipse]

Ok, so i finally had the code read at auto zone. it came up as an egr flow problem. i cleaned the egr valve and the tube before i even took it in, so im not sure what that means.

could it still be a vaccuum leak? i replaced all the lines minus the one for the brake booster, i figure if that one leaked that the brakes wouldnt work so good.

should i just replace the egr valve, and solenoid? i also noticed that when the motor is cold and i get to the first stop sign on my way to work, the rpms go between 1000 and 1500 but after that first stop it idles normal. so could the iac be causing all my problems then?

i am now clueless so any help is greatly appreciated.