[crazed2881]

I just swapped my tranny with a used (not rebuilt) one. I swapped the transfer case too, 'cause it was already attatched and less work. My old one worked great. Well now the tranny works good but the 4x4 doesn't engage. It sounds like the transfer case is making noise (like it's engaging)but not. And the lights on the dash are confusing. The only light action I'm getting is 4-Lo. But again, No 4x4. I will do more poking around, I'll listen to the case some more and check to see if the driveshaft is locked. I just want to see if this transfer case is ok or if I should swap my original back