Quote:
Originally Posted by Myxlplyxxx
... not sure about spark.... ..
|
Can u run self diagnostics? Sometimes it can give a hint wassup.
Check supply voltage; +12V and ground - at computer. If thats ok, then possibly cam pos signal is missing. If no voltage, then ign sw broken, wire loose or bad relay... (FYI: relays are color coded and can be test-swapped = problem 'moves' if u hit the trouble spot))
Spark: find any spare plug, pull one coilpack/wire & install, ground it on engine and crank. Spark should be visible at the gap...
