|
Re: How to replace power window switch?
I don't have a Malibu so my answer will have to be a generic one . I replaced the same switch in my Impala recently and it should be very similar . See if there are any obvious screws in the switch ? There may not be any ? If not , take a small flat bladed screw driver and " GENTLY " pry under the edge of the switch . These generally are held in with plastic clips so again be gentle . It should pop out , then you pull it up gently and carefully unhook the wiring connection . Reverse the steps with the new switch and you should be good to go .
__________________
" Sometimes I grow so tired "
|