|
Re: 96 ES300 gauge back lights
Check the FSMs stickied at the top of this forum for your vehicle. Yours is the equivalent of a Gen III V6 Camry. There is a bezel around the radio that you can pry loose with a tape protected flat screwdriver. Then the remaining finish panel around the cluster and A/C controls can be removed by removing the screws under the top edge of the cluster bezel and hidden under the radio bezel. Be careful pulling so you can disconnect any wires once the finish panel is loosened. Gauge cluster is held in by 4 screws. Hope this helps!
__________________
Current Garage:
2009 Honda CR-V EX
2006 Mazda 3i
2004 Chevrolet Silverado 2500HD
2003 GMC Envoy XL
2000 Honda ST1100
2000 Pontiac Sunfire
Vehicle History:
2003 Pontiac Vibe AWD - 1999 Acura Integra GS - 2004 4.7L Dakota Quad Cab 4x4 - 1996 GMC Jimmy 4wd - 1995 Chevrolet C2500 - 1992 Toyota Camry LE 2.2L - 1992 Chevrolet S10 Ext. Cab 4.3L - 1995 Honda ST1100 - 1980 Yamaha XS400 - 1980 Mercury Bobcat.
|