Quote:
Originally Posted by vgames33
http://auto.howstuffworks.com/transm....htm/printable
That has a short section on synchronizers, but should give you a good idea of how a manual transmission works.
Basically, the synchro is a ring that is allowed to slide back and forth as the gear selector is moved. One synchro controls 2 gears (forward and backward on the stick). It acts as a brake that allows the shaft and gear speeds to equalize before the shift is made, resulting in a smooth shift. If your synchro is worn out, you will have some trouble shifting into the dead gear (my 300zx has a badly work 3rd gear synchro and it has a noticeable clunk when I shift to third), or may get a grinding noise if its really bad (if I try to shift into third too quickly, it won't fully engage and I'll get the ricer gear grind and a bunch of stares from the people in other cars). The synchronizer also helps to hold the transmission in the selected gear. When it wears out, it will pop out of gear. You can bandaid this by holding the stick in position, but you will eventually need to either skip third, or just repair the problem.
You may want to check out the shift linkage before taking any action. Its possible that something is out of adjustment and won't let the shifter stay in third. Is it difficult to get into gear, or does it just pop out?
|
It doesn't feel anymore difficult than the others. While in second i push in the clutch moving it from 2 to 3 and then let the clutch back out and it pops straight back to neutral. Sometimes there is a small grinding. Sometimes it does and stays in gear. When it does stay in gear I haven't had it randomly pop back out. Just while its shifting.