I have a 1998 plymouth voyager 3.0L. This thing just will not run. The only way that I can even get it to start is with the gas peddel all the way to the floor, Then it hardly runs at all. This is what happened. The timing belt broke on my way to work one mornig
(interferance engine) So I got the parts that I needed and got to work. Major over haul. Got it all back together and repaired, crossed my fingers, said a prayer, and turned the key. It started
The van ran good for a day. ( I wasn't expecting it to run like a formula one car or any thing.) Then my problem started. I checked and rechecked the timimg. Thinking I did something wrong. that's good. I checked my codes. 12,14,42,54,55. 12 I know is the batt. 14 is the map sensor (replaced no change). 42 Is the asd fuel pump relay ( changed relay and fuel pump, still no change) 54 Is no cam signal (changed both cam sensor and crank sensor, still no change
and kick car.) Then 55 is that ther are no more codes. Rechecked my codes after I finally got the thing to start again. Only two codes 12 & 55. I haven't yet checked the egr valve to see if it is stuck and i took the idle valve out and cleaned it as well as the throtle body. Oh I almost forgot when you do get it running it gets allittle bit better idle as it warms up.( not much though) It just seems like it is getting too much gas. PLEASE HELP I NEED THE VAN BY THIS WEEK END. (have to get the kids from Wis.)