Quote:
Originally Posted by djd99
Replace your intake gasket and you should be good to go, make sure you use Fel-pro gaskets for the repair.
|
As said use the felpro problem solver hard rubber gaskets.
Not the GM or felpro plastic junk gaskets.
And use proper torque on intake.
Set dist as shown in picture and after ir is running you need to put it on a good engine capable scanner and have cam shaft retard set to specs.
http://files.automotiveforums.com/ga...hp?photo=51302
Also in the S-10 how to section there is a good how to do on it.