View Single Post
Old 06-15-2009, 03:08 PM   #3
Swansen
AF Newbie
Thread starter
 
Join Date: Apr 2004
Location: Freeland, Michigan
Posts: 52
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via AIM to Swansen Send a message via Yahoo to Swansen
Re: sanding base for clear?

awesome thanks, i should have included this originally, but is it ok to tape off/over paint that isn't fully cured? just set up?

---edit----
Well, here are my thoughts, i'm trying to do all of this to minimize the tape line, and i want to clear coat both halves at the same time to try and minimize the visibility of the line. I'll probably do the bottom portion first, wait until its no longer tacky and tape an inconspicious spot to see how the paint reacts. If all goes well, i'll tape everything off and do the top half and then clear the car. However, if i get problems and the tape messed up the paint, i'll just let the bottom portion cure over night and tape everything off, like you suggested use a scuff pad and clear everything. I figure if i shoot the top portion second it will also minimize the line rather than bottom last. I'll report back when everything is all set, thanks for the help.

Last edited by Swansen; 06-15-2009 at 04:07 PM.
Swansen is offline   Reply With Quote