View Single Post
  #11  
Old 06-12-2009, 07:31 AM
junk yard doggie's Avatar
junk yard doggie junk yard doggie is offline
AF Enthusiast
Thread starter
 
Join Date: Sep 2005
Posts: 742
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Where is the ignition module located 96 CV ???

I tried starting it on spray and still nothing. I have 10 gallons of fresh gas in it. All of the parts that I am using are used, but they are from known runners. It's not the psi reg. since I tested it on another car and the other car runs fine off of the vics regulator. I was going to pinch off that return line and try that also, but it's got the hard plastic lines and don't want to break them. I am going to replace the pump today first thing and see what happens. I got a good one on the work bench right now. It worked fine on the car I took off of and it still runs when I put power to it, day before yesterday. All my power wires going to the pump are good, relay is good. The pump still runs and pumps fuel, it's just that week fuel psi thing. I am only changing the pumps to put that theory to rest. I sure hope that's the problem. I am running out of ideas here and the cars days are numbed at this point, I am fed up it.
__________________
Mike aka JYD
Reply With Quote