Quote:
Originally Posted by danielsatur
1) Check engine oil prior to oil change on level ground.
2) Add some oil until full mark,this will tell you how much oil is
being used inbetween 3K mile oil change.
3) After 3K mile oil change service,check oil Dip stick yourself on level ground.
A 4.0 requires 5.9 qts,No less,or No more!
If you are short or too much oil,contact your oil service station.
Caution - Bad oil services can put wear & tear on Sparkplug boss seals,valve stem seals,
and valve covers.
|
I have heard of some oil consumption, but i have to date not encountered in between addtion. I am using syn Mobil1 10/40, and changing every 5,000kms