Quote:
Originally Posted by jefferie1979
update on this problem: I replaced the distributor cap and button and noticed water on the point that makes contact with the button. I then noticed that one of the 2 ears that holds the cap on was broken. I'm sure that's why I had water in there but kinda bandaid fixed it by pasting some sillicone to hold the one side down and prevent water. My question is does anyone think this will work or will I have to replace the distributor itself or even some other tip as to what to do. thank you
|
Best to replace the dist housing or dist.
Check with dealer and see if you can get just the plastic dist body any cheaper than the hole dist.
Or sometines if you are luckie just a little bigger bolt in the cap hole/ear will hold it down good.
Good luck