|
Re: Power windows/locks wiring
I did this on my base s10 and the wiring easy, to do the locks, you need relays and i believe you alreade have the actuators, I wire the actuator so that they both rest at ground and when you apply a - pulse one side of the motor will be positive and the other negative. i have the wiring in my computer but im sure you can find it on google.
The relays i like to use are DEI 451M, you need just one because they actually a relay pack, I have a few here because ive been installing alarms and starters. if you need just one let me know. i'll let it go cheap
__________________
 -MODS-
Autometer Boost,Oil Presure,And Water Temperature Gauges./Geddy Turbo Tmer/Eibach Sportline Springs Matched With Adjustable Iluminas 4 Corners/Konig 18" On Nitto Extreme 555/ACT 2100 PP with Street Disc/Extended Push Rod/Urethane Motor Mounts/XS Power FMIC. 28X10.5X3.5/Greedy Type RS BOV/ evo3 16g Turbo/MBC At 18PSI/Bian Crower 272 cams/SAFC2 With 510cc Injectors/Walbro 190 FP/
1/4 mile=14.3@103MPH
|