Quote:
Originally Posted by tyriekfv
I really dont care about the 9C1 I just know that is the version that had the rear discs with the full posi.
Are those not an upgrade over the rear drums in any form?
http://www.cardomain.com/ride/3309049
This is the car the mods would be going to.
My plan was to find a cheap donor for this project, and it just seemed the simpler path. For 1k there is a LT1 around the corner waiting to be installed in something. But I figured for that amount I could just buy a donor from an Auction and get the engine PLUS whatever else I can take. |
Not all of those have posi. I have a '94 rear axle setup in my '88 (with necessary combo valve mods) with the discs ... and it has an open diff, not limited slip.
__________________
1988 9C1 - Modified LM1 @ 275HP/350TQ - TH700R4 - 3.08 8.5" Disc Rear - see it at
http://www.silicon212.org/9c1!
2005 Crown Vic P71 - former AZ DPS - 4.6 liters of pure creamy slothness!
1967 El Camino L79/M20 old school asphalt raper
Remember - a government that is strong enough to give you everything you need, is also strong enough to take everything you have.