|
Re: check engine light comes on
Very interesting.
Sounds like your scanner may not be able to pick up on that specific code.
Have you tried another scanner or possibly autozone/free place that will scan codes for you?
I would try to get another scanner or two on it.
There must be something the light is coming on for if your scanner clears codes and it goes off temporaily, but the problem sounds like a hard code - since it comes right back again.
Usually a bad sensor giving a strange reading to the computer will keep a strong code coming back every time.
This problem only started happening after the different engine was installed?
You may want to check part numbers on sensors for the two engines - maybe one is made with slightly different parameters causing the computer to be alarmed from the readings....
Please give more specifics, if possible, on how it behaved before and after the engine swap etc....
Hopefully this helps you in some way!!!
Let us all know how it goes!
Dale in Idaho
|