Security light is the factory dashboard thingie.
I have the wiring schematic, but am not sure how to read it.
It shows an ignition switch with 3 wires coming out of it. One wire is labelled ignition (and goes to a long skinny rectangular unlabelled box that has almost everything going to it - ie. battery, valet switch, trunk switch, door switch), two wires starter. The starter wires have indications marked "cut" and are labelled "White/Red (starter N.C.)" and "White starter common". There is a third wire that joins them from nowhere labelled "White/Blue (starter N.O.)" with a reference to "see text" - I have no text.
The wires are joined and plug into an unnamed retangular box.
What would the relay look like and where do you think that might be located?
Side note - it happened again this morning. There is a valet switch below the steering column and I took off the plastic cover of the car under the driver side dash. The valet switch has a group of wires trailing out that seem to lead behind the speedometer - with two wires going to the Piezo.
Am I better off beginning at the starter, valet switch or ignition? If inside the car, is there any way to get there without having to take off the dashboard?
Thanks for your help,
Joe