Quote:
Originally Posted by HD RACING
I have removed the two ac bolts, the one behind the compressor and the one up top. I tapped it with a hammer and still no luck any tricks? There is a dowl pin on the head, do you need to spin the bracket on that pin?
|
You do not have to remove the one dowl ? head bolt, however that sucker broke my 15mm deep socket when I tried to remove it later....
If you have the four bolts out and it should be loose. You have the two long ones out on the bottom - how about the short top one for the compressor - make sure you have this one/top a/c bolt removed too as the compressor has to be free so it swings back a bit. There are 3 bolts on the compressor - but only the bottom two are in the bracket. Then it should be easy.