[bcsman]

Don't think I need to get to the backside of the SJB. I have a diagram for the 2006 Taurus showing the pertinent wires and locations on the Taurus. Mostly on wires feeding into the GEM and SJB which I have located. Others are located feeding the ignition switch which I have also located and can access fairly easily taking the drivers kick panel off under the steering wheel. Just trying to find another 12V "hot" wire to hook a third 12V input wire into the remote start control. I'm hooking two wires into the "hot" light green/violet wire feeding the ignition switch, but not sure I should hook a third there. I have considered the "hot" yellow/white wire feeding the headlight switch as I'll have that out anyway. That's why I wanted to access the SJB to probe for another "hot" wire.

I posted about it on this forum a few hours ago explaining my situation.