[Richy78]

Here I am, like Gionc I decid e to start with the body, which is the most challenging job in this project.

I sand down the whole body with sand paper 1000 grit.
Then I spay an heavy coat of Tamiya white primer to check for body minor foults (a couple of bubble, nothing else).
I smooth the primer with 1500 sand paper under current water and I rescribe the panel lines with an exacto blade.
So I am ready to spray the body with Zero racing White.






I start masking the white areas to spray Rosso Corsa 322 from Zero







Here the body after three mist coats.