UPDATE....Have sanded the body with 800. I have used white putty to fill all the door handles/boot holes and touring car wing holes. This well slow things down as the door hole handles are large and will take a few goes at getting just right.Well take a while to dry.
I have sat the body back on and have cut the hole in the bonnet.
I marked it out and cut it out with a modelers hacksaw.
Removed the bonnet pins and filled them and well sand it .
Been mucking around getting the bumper to fit the front(whats it off Dan ?) and got it just right.
Have decided to built a Prostock type wing for the back.