|
Re: No spark can you help
Update
I found a crack in the distributor cap between were the coil contacts and were the rotor contacts. I applied 12 volts to the center post and using a test lamp touched ground and the ignition coil post I get nothing. Could the crack cause the complete breakdown of the path.
Also I checked the coil resistance It should be .39 and .55 I get about .9 it is still hooked up though could that throw the reading off .4 ohms.
Also the plug wires showed nothing (open) the DVM doesnt show any change at all I checked all the wires and they all show the same thing. It should be about 25K or less but I checked all the ohms scales and it didnt move at all.
|