[mpumas]

You got to remove the door panel for the drivers side front master window switch. After you get the panel off and all the connectors off you will see the screws to remove the arm rest assembly. After you get that off, you will see more screws to remove the switch assembly which also includes the mirror switch. (When two windows do not work, the problem is usually the front master switch.) The whole switch can be disassembled after lifting the rubber cover which is on top of the switch assembly but under the switch levers. Look at the contacts, sometimes they get a varnish layer on them which prevents the contacts from making a connection. As for the rear window, a can't remember how the switch is held in but prying out maybe an option. If not, remove the panel and look. I had to replace my master switch and got one from a junk yard. Color of the bezel is not important because you can remove the switch assembly and install it on your old bezel. On any of the doors, the windows can be raised or lowered by applying voltage to the motor leads which are anchored to a terminal strip on the door. Good luck.