I am trying to do the bypass using the resistor method on 2002 Pontiac sunfire 5sp manual, but I can't seem to get a reading on the meter to find out what resistor (s) I need.
Where am I going wrong?
I followed the below procedure :
(1) Start car
(2) Cut yellow wire (security light comes on)
(3) turn car off
(4) strip yellow wire ends and part of black wire.
(5)meter between yellow (going to ignition switch) and black ground for resistance as I start car
(6) (security light is still on)
(7) turn car off
(8) solder correct resistor between yellow (going into dash) and black
(9) start car (security light is off)