Thread: P0101 Problem
View Single Post
  #10  
Old 01-13-2009, 09:52 PM
old_master's Avatar
old_master old_master is offline
Advisor/Moderator
 
Join Date: Nov 2005
Posts: 5,184
Thanks: 6
Thanked 103 Times in 95 Posts
Re: P0101 Problem

Connect tester to the service port on the fuel pressure line at rear of intake manifold, driver side near the distributor. Ignition on, engine off, fuel pump running, pressure must be 60psi to 66psi. Pressure must remain above 55psi for 3 to 5 minutes after fuel pump shuts off.
Reply With Quote