Quote:
|
Originally Posted by tolaschkm
I know what exatly what i wrong with your ABS.... you need a new abs Moduale and valve assembaley... new ist about 1200 dollors but one out of the junk yard will work for about 300
|
No way anyone can know what is wrong until proper testing is done.
Quote:
|
Originally Posted by tolaschkm
Well yeah it is good greif..
I am a ASE Master Tech are you..
We see this all the time in the shop. ussaly after someone has been off roading or going through a lot of snow...
what happens is when you hit the brakes and the abs atartes pulsing and the driver starts pumping the brakes.. the Abs Valve and Moduale can not keep uo and overload the valve. so the abs and brake lite will come on at the same time.. sometimes it come on right away and other times not all depends on braking.. you do not need a new computer. you are wasting your time..
take it to the dealer and you will see
|
Read the poster post.
The poster has already been to the dealer and just got robbed.
Quote:
|
Originally Posted by tolaschkm
Well yeah it is good greif..
I am a ASE Master Tech are you..
We see this all the time in the shop. ussaly after someone has been off roading or going through a lot of snow...
what happens is when you hit the brakes and the abs atartes pulsing and the driver starts pumping the brakes.. the Abs Valve and Moduale can not keep uo and overload the valve. so the abs and brake lite will come on at the same time.. sometimes it come on right away and other times not all depends on braking.. you do not need a new computer. you are wasting your time..
take it to the dealer and you will see
|
We are not here to get into a pissing match over who has the biggest ASE patch.
Quote:
|
Originally Posted by tolaschkm
If your system is full there should be no air getting into the system..also you should never have to chage the dot 3 fluid..
the recomended thing to do is to take it do the dealer and have a full dignostic done.. should not cost more than 35-60 dollors. the abs modual and vavle assembley is all one unit. if you look under the hood it will be right after the brake buster. it will have a silver top on it and have wires comming out of it. that is the moduale. and the valve is under it. you can replace it your self but you will have to take it to a dealer to program it..
|
Reread the posters post.
He has already been to the dealer and got robbed out of 85 dollars.
With out any help on his problem.
When did they start reprogramming ABS modules?