Quote:
|
Originally Posted by jcurry05
I know its been several years since this was addressed but I was hoping that somebody had an answer to it now. I am wondering the same thing.
|
Due to old post/thread rules your post has been moved to its own thread. The original post is below for reference.
To answer your question the best place to place jack stands on the front end for safety is at the area of the subframe....where the lower control arms connect. The subframe is what holds the engine and transaxle to the body.
Use the jacking points prescribed in the owner's manual.
Quote:
|
Originally Posted by MrPockets
Evening. Been working on my '98 GP GT for a little under a year, and i have yet to find a sollid point to lower the car onto a pair of jack stands. Ive got a new downpipe coming from zzperformance.com and i really dont know where there is a good spot to set the car onto the stands that will leave enough room to still fit the jack down there to get it onto/of off. Where do you guys lower it onto, and if its not too big of an inconveniance, pictures would be very much helpfull.
thanks as always,
-MrPockets
|